Nikon eclipse Ti-S/L100 Instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Nikon eclipse Ti-S/L100. Nikon eclipse Ti-S/L100 25 stron. Inverted microscope
Drukuj stronę
1.1
Microscope Configuration
1.1.1
Ti-U, Ti-U/B
The illustrations below show the Ti-U microscope body with the following accessories:
TI-DH Dia Pillar Illuminator 100W, TI-C Condenser Turret, D-LH/LC Precentered Lamphouse LC, 12V
100W halogen lamp, TI-PS100W Power Supply, TI-SR Rectangular Mechanical Stage, TI-T-B Eyepiece
Base Unit, TI-TD Eyepiece Tube B, CFI 10x eyepieces, TI-ND6 Sextuple DIC Nosepiece, objectives, etc.
Field diaphragm knob
Aperture diaphragm open/close lever
Condenser centering knob (both sides)
Condenser turret (Fig.: TI-C)
Eyepieces (both sides)
Eyepiece tube (Fig.: TI-TD)
Eyepiece base unit (Fig.: TI-T-B)
Power supply device
(Fig.: TI-PS100W)
Microscope base
(Fig.: Ti-U)
Intermediate magnification
selector knob
(1.5x < --- > 1x)
Left side port*
Chapter 1 Part Names
1.1 Microscope Configuration
Condenser lens
Optical path
selector knob
Focus knob
(Coarse/Fine)
Figure 1-2 Ti-U (Left View)
Focus knob (Coarse/Fine)
Coarse focus stopper ring
Figure 1-1 Ti-U
ON
OFF
6V30 W
12V1 00W
MAX.
Torque adjustment ring
for coarse focus knob
* Attach a protective cap on the side port when the side port is not in use.
12
Lamphouse for dia
illumination
(Fig.: D-LH/LC)
Filter sliders
(both sides, 4 total)
Condenser mount
Condenser focus knobs
(both sides)
Dia pillar illuminator
(Fig.: TI-DH)
Objectives
Stage ring (concentric ring)
Stage (Fig.: TI-SR)
Nosepiece (Fig.: TI-ND6)
Right side port
Stage knob
Dia illumination ON/OFF switch
Dia illumination brightness
control knob