Nikon SMZ800 Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Nikon SMZ800. Nikon SMZ800 40 stron. Stereoscopic zoom
Również dla Nikon SMZ800: Instrukcja obsługi (42 strony)

Drukuj stronę

[C-PS & C-PSC]

The stand arm can be lowered. (If you

do not need to lower the arm, jump to

step 6.)

Use the hexagonal wrench (large - supplied

with the focusing stand) to loosen the arm

fixing screw. Reattach the arm using the

screw hole at the lower side of the vertical

slider. The arm will become 55 mm lower

than its original position. Before tightening

the screw, make sure that the two pins on the

arm fit in the grooves on the vertical slider.

Mount the zooming body.

Lightly tighten the zooming body clamp

screw to hold the zooming body on the

focusing mount or arm.

Note) Do not over-tighten the zooming body

clamp screw since it may cause

damage to the instrument.

Screw the objective into the bottom of

the zooming body.

Mount the eyepiece tube.

Align the groove on the eyepiece tube with

the positioning pin on the zooming body, push

the eyepiece tube toward the back to attach.

Tighten it to the zooming body using the

supplied hexagonal wrench (small) or the

clamp tool supplied with the C-PS160.

Groove

Positioning pin

Groove