Nikon Aculon Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Nikon Aculon. Nikon Aculon 33 stron.

Drukuj stronę

Distance display units

Measurement results are displayed in yards/meters.

(Factory default setting is yard.)

Yard [

]

Meter [

]

1. Turn on the power (Confirm the internal display is on).

2. Press and hold the MODE button for more than two seconds.

When the display unit has been switched, release the button.

3. After the unit is set, results will be converted and displayed in

the selected distance display unit.

Others

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules and to EU EMC directive. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

This Nikon Laser Rangefinder is a basic rangefinder. Its results cannot be used as official evidence.

Target priority mode

This Laser Rangefinder has a Distant

Target Priority System. When measuring

overlapping subjects, this equipment

displays the distance to the farthest subject.

Specifications

Measurement system

Measurement range

Distance display (increment)

Optical system

Type

Magnification (x)

Effective diameter of objective lens

(mm)

Angular field of view (real) (˚)

Eye relief (mm)

Exit pupil (mm)

Diopter adjustment

Others

Operating temperature (˚C)

Power source

Dimensions (L x H x W) (mm)

Weight (g)

Structure

Safety

EMC

Environment

5-500 m/6-550 yd.

Every 1 m/yd.

Roof-prism monocular

6.0

16.7

3.3

±4m

-1

-10 — +50

CR2 lithium battery x 1 (DC 3V)

91 x 73 x 37

Approx. 125 (without battery)

JIS/IEC protection class 4 (IPX4) equivalent (under

our testing condtions)

Class 1M Laser Product (EN/IEC60825-1:2007)

Class I Laser Product (FDA/21 CFR Part 1040.10:1985)

FCC Part15 SubPartB class B, EU:EMC directive, AS/

NZS, VCCI classB

RoHS, WEEE