Nikon Monarch 12x42DCF Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lornetka Nikon Monarch 12x42DCF. Nikon Monarch 12x42DCF 11 stron. Sport optics
Również dla Nikon Monarch 12x42DCF: Instrukcja obsługi produktu (2 strony), Instrukcja obsługi produktu (2 strony), Broszura (25 strony), Instrukcja obsługi produktu (2 strony)

Drukuj stronę

Nikon Monarch 12x42DCF Instrukcja obsługi

Nomenclature

Please refer to the numbered images on page 3.

1 Eyecup

2 Neck strap eyelet

3 Focusing ring

4 Objective lens

5 Interpupillary distance

English

6 Dioptre ring

7 Dioptre index

8 0 (zero) dioptre position

9 Central shaft

!p Mount holes for objective lens caps

Eyecups

For directions in which to turn the eyecups, please refer to the image on page 3.

・For eyeglass wearers, use fully retracted. To accurately adjust your view,

you can also use two click stops before reaching the fully retracted

position.

・For non-eyeglass wearers, use fully extended. To accurately adjust your

eye position, you can also use two click stops before reaching the fully

extended position.

ITEMS SUPPLIED

Binoculars

Eyepiece lens cap

Objective lens caps

Soft case

Neck strap

Neck strap and caps during observation

Please refer to images A, B, C, D and E on page 3.

Neck strap

Attach the neck strap as illustrated (A), taking care to avoid twisting the strap.

Eyepiece cap

There are two ways you can position the eyepiece cap as you observe your subject.

1. Remove the eyepiece cap from the eyepieces and allow it to hang from the neck strap.

2. Remove the eyepiece cap from the eyepieces, then detach the right strap from the cap and allow

it to hang from the left neck strap (B).

To attach/detach the eyepiece cap, pull the neck strap through the slits as shown in image (C) in the

following order:

• Attaching: c → b → a

• Detaching: a → b → c

Flipdown objective lens caps

There are two ways you can position the objective lens caps as you observe your subject.

1. Detach the objective lens caps from the body.

2. Fold open the objective lens caps.

• Attaching (D):

Insert the convex parts of the objective lens caps into the binocular holes in a diagonal direction as

illustrated.

Make sure the objective lens caps are properly and securely mounted.

• Detaching (E):

Insert the index finger between the objective lens cap band and the body. Push the end of the

band as indicated by the arrow in figure (E) to detach.

Objective lens caps may become detached due to external pressure or other strong force. Take care

to avoid losing them.