Nikon Monarch 8x42 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lornetka Nikon Monarch 8x42. Nikon Monarch 8x42 9 stron.
Również dla Nikon Monarch 8x42: Instrukcja obsługi (20 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

Nomenclature

1 Eyecups

2 Neck strap eyelet

3 Focusing ring

4 Objective lenses

5 Interpupillary distance

English

6 Diopter ring

7 Diopter index

8 0 (zero) diopter position

9 Central shaft

*Waterproof models:

All models shown are waterproof, and will suffer no damage to the optical

system if submerged or dropped in water to a maximum depth of 1 meter

for up to 10 minutes.

These products offer the following advantages:

• Can be used in conditions of high humidity, dust and rain without risk of

damage.

• Nitrogen-filled design makes them resistant to condensation and mold.

Observe the following precautions when using these products:

• As the unit does not have a perfectly sealed structure, it should not be

operated nor held in running water.

• Any moisture should be wiped off before adjusting movable parts

(focusing knob, eyepiece, etc.) of these products to prevent damage and

for safety reasons.

To keep your binoculars in excellent condition, Nikon Vision recommends

regular servicing by an authorized dealer.

Please refer to the numbered images on page 2.

ITEMS SUPPLIED

Binoculars ............................ x1

Eyepiece cap ....................... x1

Objective lens caps .......... x2

Soft case ............................... x1

Neckstrap ...............................x1

Eyecups

For directions in which to turn the eyecups, please refer to the image on page 2.

・For eyeglass wearers, use fully retracted. To accurately adjust your view, you can also use two click

stops before reaching the fully retracted position.

・For non-eyeglass wearers, use fully extended. To accurately adjust your eye position, you can also use

two click st

ops before reaching the fully extended position.

Neckstrap and caps during observation

Please refer to images A, B, C and D on page 2.

Attach the neckstrap as illustrated (A), paying special attention to avoid twisting the strap.

Attach the objective lens caps (B), making sure the cap part hinges open downward from the binocular tube

when folded open. The slit should be visible at the left side of each binocular tube, viewed from the eyepiece

side, to confirm correct positioning (correctly attached when supplied).

Eyepiece cap during observation

There are two ways you can position the eyepiece cap as you observe your subject.

1. Remove the eyepiece cap from the eyepieces and allow it to hang from the neckstrap.

2. Remove the eyepiece cap from the eyepieces, then detach the right strap from the cap and allow it to

hang from the left neckstrap (C).

Objective lens caps during observation

The binoculars are used with the objective lens caps folded open (C).

Attaching and detaching the eyepiece cap from the neckstrap

Attach/detach caps from the neckstrap as shown in image (D) in the following order:

Attaching: c → b → a

Detaching: a → b → c