Clas Ohlson 36-7285 Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria Clas Ohlson 36-7285. Clas Ohlson 36-7285 5 stron. Wireless battery operated doorbell
Drukuj stronę
Wireless battery operated doorbell
Art.no 36-7285
Model 98203 battery
Please read the entire instruction manual before use and then save it for future
reference. We reserve the right for any errors in text or images and any necessary
changes made to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
•
Never subject the product to high temperatures, damp or dusty environments,
heavy vibrations or impacts.
•
The indoor unit must not be exposed to rain or moisture.
•
The battery should be removed if the product is not to be used for an extended
period, otherwise the battery might leak and damage the product. Never leave
discharged batteries in the battery compartment.
•
Never try to repair the product, dismantle or modify it in any way.
Buttons and functions
1. Doorbell/receiver
2. Button to select the volume
3. LED indicator
4. Transmitter
5. Push Button Ring Signal
Installation
Handy tip:
•
1 transmitter is included but you may also connect an additional 7 transmitters
(sold separately).
•
If you are connecting several transmitters to the doorbell, set different signals
for each transmitter so you know at which door the signal is coming from.
Battery/pairing the units
1. Open the transmitter carefully
by pressing the latch with
a screwdriver.
2. Remove the plastic tab from
the battery holder to activate
the battery in the remote control.
3. Remove the battery cover from
the back of the doorbell.
4. Observe the markings on
the bottom of the battery
compartment and insert
2 × AA/LR6 batteries.
The doorbell will sound twice
and the LED indicator (3) starts
to flash which indicates that
the doorbell is ready to be paired
with the transmitter.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
5. Within 30 seconds,
press the transmitter
that you want to
connect the doorbell
to. The doorbell
will sound when
the pairing has been
successful.
6. If you wish to pair another transmitter, take out
the batteries from the doorbell and cut off the power
supply. Then repeat steps 4−5.
7. Replace the battery cover on the doorbell.
Choosing the ring signal
Once the pairing has been successful, choose the ring
signal by pressing repeatedly on the button inside
the transmitter. You can choose between a total of
16 different melodies and sounds:
1
4
1. Dingdong
2. Für Elise
3. Westminster Chimes
4. The Butterfly Lovers
2
5
5. Swan Lake
6. Red River Valley
7. My heart will go on
3
8. Turkish March
Selecting the volume
Press the button to select the volume.
You can choose between high and low
volume.
Assembly
Information
•
Avoid placing the units next to metal objects such as metal window frames as
this may cause interference with reception.
•
Test the doorbell's functionality/location before final mounting.
Transmitter
1. Screw on
or glue (with
double-sided
adhesive tape)
the backplate
of the
transmitter to
the wall.
9. Menuet
10. Congratulations
11. William Tell Overture
12. Romance of love
13. Memory
14. The Little Mermaid
15. Greensleeves
16. Romeo & Juliet
2. Fit the
transmitter
onto the
backplate,
making
sure that
the gasket is
in place. Press
the latch on
the transmitter
until it clicks
into place.
Doorbell
Attach a screw to the wall and hang up the doorbell on
the wall bracket.
Remove the paired transmitter
Information
If you follow the following steps, it will remove all the paired
transmitters from the doorbell's memory.
1. Dismantle one of the transmitters.
2. Remove the power supply to the doorbell by removing the batteries. Wait a few
seconds and insert the batteries again so that the doorbell is in pairing mode.
The doorbell will sound twice.
3. While the doorbell is in pairing mode, press the button inside the transmitter.
The doorbell will sound to confirm that all the transmitters have been removed
from the doorbell's memory.
Care and maintenance
Clean the product using a damp cloth. Use only mild cleaning agents, never solvents
or corrosive chemicals.
Troubleshooting
No sound when
•
Check that the batteries are inserted correctly and that
the push button
they are not flat.
is pressed.
•
Excessive distance between the transmitter and the doorbell.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout the entire EU.
In order to prevent any harm to the environment or health hazards
caused by incorrect waste disposal, the product must be handed in
for recycling so that the material can be disposed of in a responsible
manner. When recycling the product, take it to your local collection
facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
Specifications
Doorbell (receiver)
Batteries
2 × AA/LR6 batteries (sold separately)
Power consumption
≤ 0.5 W
Range
Up to 100 m (clear line of sight)
Noise level
78 dB (at a distance of 1 m)
Signals
16 different melodies and sounds
Size
70 × 70 × 27 mm
Push button (transmitter)
433.92 MHz
Transmission frequency
CR2032 lithium (3 V)
Battery
Size
35 × 17 × 85 mm