Armorgard TrekDror TKD2D Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przechowywanie narzędzi Armorgard TrekDror TKD2D. Armorgard TrekDror TKD2D 8 stron.

Remove the drawer and slot two

coachbolts into the fixing points at

the rear of the casing. Drop the

rear down through prepared holes

in the floor, and screw nuts onto

the coachbolt from the other side

of the surface.

Stacking multiple TrekDrors

If you have more then one

TrekDror, they can be stacked in

different layouts using the optional

stacking plates. These create a

small gap between the units.

At the front, push the bolts

through from inside the casing.

M10 bolts are recommended for

best fit. Ensure the casing is rigid

and firm before fitting the drawer

back in place.

Bolt the stacking plates to the

fixing points on the side of the

TrekDrors. All 4 plates and 16

bolts are required to keep it rigid

and secure.