Dirt Devil TWIN MOTOR 1099e Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Centralne systemy próżniowe Dirt Devil TWIN MOTOR 1099e. Dirt Devil TWIN MOTOR 1099e 8 stron. Central vacuum
Również dla Dirt Devil TWIN MOTOR 1099e: Instrukcja obsługi (16 strony)
General Power Unit
Maintenance
The simple care and maintenance
instructions included here will help
ensure trouble-free use of the
central vacuum system.
• Do not place objects on top of the
power unit. The motor could
overheat.
• Do not allow the motor to remain
"on" unless a hose is connected or
an inlet valve is open. If airflow is
not permitted to flow through fan
blades, motor damage may occur.
• Empty the dirt canister when it is
1/2 - 2/3 full.
• Change the filter cartridge once a
year.
• The power unit does not require
any lubrication.
• The exterior of the power unit can
be wiped with a clean, dry cloth.
Do not use liquid cleaners or
water as an electrical shock may
occur.
• For additional service contact a
qualified service person.
Troubleshooting the
system
Motor Fails to Turn On:
• Check the main fuse or circuit
breaker at the main power supply
panel of your home. Reset breaker
or replace fuses if necessary.
• Check the Power unit reset button
located above the power cord.
Pressing the button should restore
operation.
• If the circuit protector continues to
trip off after a short period of
time, the motor brushes may be
worn out. Call a qualified service
person for service.
Loss of Vacuum
If the system shows a loss of
vacuum power, check the following:
• The dirt receptacle and filter may
need cleaned – follow instructions
in this guide.
• The hose may be clogged – To
check if there is an obstruction,
unplug the hose and insert an
object that is smaller then the
diameter of the hose (A butter
knife works well). Pass the object
completely through the hose, if it
stops that will indicate where the
obstruction is located. A dry
garden hose can be inserted into
the hose to help push obstruction
through.