ABBA CDR75 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Oświetlenie zewnętrzne ABBA CDR75. ABBA CDR75 3 stron.

CAUTION:

fixture(s) must be installed in accordance with all local codes and ordinances.

Do not instal within 10 feet of a pool, spa or fountain

INSTALLATION INSTRUCTION

fixture(s) should be used "ONLY" with

low voltage landscape power units

that do not exceed 25A, 15V.

The main cable from power units

should be buried for less than 6 inches

under the ground level.

1. Please ensure the light cable wires

input are 12v ac/dc.

2. Turn off power before installation.

3. Attach the fixture(s) wires to the

main cable connector suitable for

direct burial. Use waterproof wire

nuts. WN12 (Sold separately).

4. Put the spike into the ground. Try to

make firm vertical mounting.

5. Adjust the light angle.

Main Line

6. Turn on power.

Connect the wires using

WN12 (Sold separately)