ABBA DL05 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Oświetlenie zewnętrzne ABBA DL05. ABBA DL05 3 stron.
Również dla ABBA DL05: Instrukcja instalacji (3 strony)

Drukuj stronę

CAUTION:

fixture(s) must be installed in accordance with all local codes and ordinances.

Do not instal within 10 feet of a pool, spa or fountain

INSTALLATION INSTRUCTION

fixture(s) should be used "ONLY" with

low voltage landscape power units

that do not exceed 25A, 15V.

The main cable from power units

should be buried for less than 6 inches

under the ground level.

1. Please ensure the light cable wires

input are 12v ac/dc.

2. Turn off power before installation.

3. Attach the fixture(s) wires to the

main cable connector suitable for

direct burial and use waterproof wire

nuts. WN12 (Sold separately).

Main Line

4. Put the spike into the ground. Try to

Connect the wires using

WN12 (Sold separately)

make firm vertical mounting.

5. Remove the lens from the fixture.

6. Insert the bulb with the correct

wattage.

CAUTION: Do not exceed maximum

wattage on the fixture.

7. Place the lens back onto the fixture.

8. Adjust the light angle.

9. Turn on the power.