Dirty Hand Tools 101571 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Tiller Dirty Hand Tools 101571. Dirty Hand Tools 101571 20 stron. 15” front tine tiller

Handlebar Assembly

Mounting Lower Handlebars

NOTE:

e left and right hand handlebars are identical. Each has two

holes drilled in one side and one hole drilled in the opposite side of the

handlebar tube.

e two hole side of the handlebars should face inward

toward each other (see Figure 3).

1. Attach the two lower handlebar tubes to the tiller with a tube support

bracket and two hex bolts on each side (see Figure 4).

2. Position the handlebar components as shown in Figure 5.

3. Push the long threaded bolt through all of the components, then secure

at the end with a hex nut.

3. Make height adjustments to the handlebars for operation comfort and

tighten the handlebar adjustment knob securely.

Figure 3

HANDLEBARS

UPPER

HANDLEBAR

LEFT

LOWER

HANDLEBAR

LOWER

SUPPORT

BRACKET

HANDLEBAR

FACE PLATE

Figure 5

Figure 4

UPPER

HANDLEBAR

RIGHT

PLASTIC LOCK

HALVES

HANDLEBAR

ADJUSTMENT

KNOB