Cub Cadet Z-Force S Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kosiarka Cub Cadet Z-Force S. Cub Cadet Z-Force S 20 stron. 58” snow blade
Również dla Cub Cadet Z-Force S: Ograniczona gwarancja (1 strony)
Drukuj stronę
20.
Remove the lynch pin and cotter pin from the shoulder lock
pins on the lift bracket assembly (#4). Insert the shoulder lock
pins into the lift arms on the tractor and re-insert the lynch
pins to secure the lift bracket assembly (#4) in place. See
Figure 2-11.
21.
With the help of an assistant, slide the blade assembly (#1)
into position beneath the brace bracket assembly (#3).
Line the holes on the blade frame assembly (#1) up with
the holes in the brace bracket assembly (#3) and insert the
shoulder screws (#22) through each hole and secure with a
pair of hex lock nuts (#15). See Figure 2-13.
NOTE: The blade assembly should pivot freely on the
shoulder screws.
8
S
2— A
ection
SSembly
Figure 2-12
Figure 2-13
& S
-U
et
p
22.
Insert the lift rod (#5) partially into the lift bracket assembly
(#4), fully thread one jam nut (#24), then slide the lift rod
(#5) the rest fo the way through the lift bracket assembly
(#4). Then install the lock washer (#18) and the other jam
nut (#24) onto the end of the lift rod (#5). See Figure 2-14.
Figure 2-14
NOTE: Do not fully tighten the jam nuts (#24) until
instructed to do so.
23.
Slide the curved end of the lift rod (#5) into the front lift
bracket on the blade assembly (#1). Secure in place with the
cotter pin (#16). See Figure 2-15.
Figure 2-15
NOTE: When installing the lift rod (#5) make sure the rod is
inserted through front lift bracket from the left side.