DIS FC 6020 Arkusz danych
Przeglądaj online lub pobierz pdf Arkusz danych dla System konferencyjny DIS FC 6020. DIS FC 6020 2 stron. Front plate unit
Drukuj stronęFC 6020 Front Plate Unit
• Chairman front plate
• Flush mounted installation
• Chairman operation
• Lockable XLR microphone connector
• Loudspeaker
• Microphone button
• Delegate off button
Description
The FC 6020 front plate unit is a flush mounted unit designed to be used in
combination with the MU 4040 or MU 6040 C microphone units. The unit is
especially suited for installations where the flush mounted unit must take up
minimal space with minimum components. The remaining components are fit-
ted into the MU that can be mounted in a more spacious location.
The unit can be configured for use with the MU 4040 or MU 6040 C by mov-
ing a jumper on the PCB on the back of the unit. The default position of the
jumper is for use with the MU 6040 C.
The flush mounted unit features a built-in loudspeaker that distributes the
floor channel. The loudspeaker automatically mutes when the microphone is
turned on.
The unit also features a microphone and a delegates off button. The mi-
crophone button enables the user to activate/deactivate the microphone.
The delegates off button enables the user to turn off all active delegate
microphones.
The FC 6020 can be used in combination with the gooseneck microphones
GM 652x or GM 6622 or the boundary microphone BM 6620.
The gooseneck microphones GM 652x or GM 6622 can be locked to the
unit with a 2 mm hex key. The lock is accessible from the small hole above
the XLR socket. Turn the hex key clockwise to enable the lock and insert the
gooseneck microphone into the XLR socket. Turn the hex key counter clock-
wise to disable the lock and remove the gooseneck microphone.
The boundary microphone BM 6620 can be retrofitted by replacing the XLR
insert in the plastic adaptor with the boundary microphone. The molex mini-
connector fits with the microphone connector on the PCB.
The FC 6020 can be combined with any conference units from the DCS 6000
Digital Conference System.
DIS Digital Conference Systems
FC 6020 Front Plate Unit
Features
The FC 6020 has the following standard features:
• Standard conference unit for chairmen
• Fully digital audio transmission
• Daisy chain topology with loop-through connections or star
topology using junction boxes
• CAT 5e (or higher) F/UTP or U/FTP cabling
• Maximum 3800 conference units per system
• Support for four microphone operation modes; Automatic,
FIFO, Manual and VOX (voice activation)
• Support for three microphone interrupt ability modes enabling
'ping pong' mode
• Auto off of microphones
• Lockable XLR gooseneck microphone connector
• A high-quality loudspeaker
• Microphone and delegate off buttons with LED indicators
• Single cable connection to the MU 4040 or MU 6040 C
Data sheet DS-FC6020-c