BlackWing CT4-V Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria samochodowe BlackWing CT4-V. BlackWing CT4-V 6 stron.
Drukuj stronę6. CUSTOMIZE YOUR PERFORMANCE
DRIVER MODE SELECTOR
Models: CT4-V Blackwing and CT5-V Blackwing
When maximum vehicle handling is desired for track use or competitive driving, Track Mode should be selected using the Driver Mode
Selector switch. When in Track Mode, the accelerator pedal is adjusted to give maximum control during the highest level of spirited driving. If
the vehicle is equipped with Magnetic Ride Control™, it will be set to optimum level for vehicle responsiveness. If the vehicle is equipped with
Active Exhaust, the exhaust valves will be open.
CUSTOM LAUNCH CONTROL
Models: V-Series Blackwings. Custom Launch Control allows the Launch RPM, Slip Target (5%-15%) and Surface Type parameters for Launch
Control to be modified.
To adjust Launch RPM:
•
The vehicle must be in Track Mode
•
Performance Traction Management (PTM) Mode must be enabled
•
The steering wheel must be straight and the driver door closed
•
The transmission must be in a gear other than R (Reverse). It will work in P (Park) or N (Neutral)
•
The parking brake must not be engaged
Using the steering wheel 5-way controller, scroll to "Options" on the Driver Information Center menu to select your Surface, Launch RPM and
desired Slip Target. For full details and information, see Owner's Manual.
LINE LOCK
Models: V-Series Blackwings.
Line Lock allows for locking the front brakes independently of the rear brakes. This allows the rear tires to spin when the throttle is applied.
To enter Line Lock, all of these conditions must be met:
•
The vehicle must be in Track Mode
•
Performance Traction Management (PTM) Mode must be enabled
•
The steering wheel must be straight and the driver door closed
•
The vehicle must be in D (Drive) for automatic transmission or 1
be engaged
•
The vehicle must be stopped on level ground and the accelerator pedal must not be applied
Using the buttons on the right side of the steering wheel, scroll to "Launch Control" on the Driver Information Center menu to select an
Automatic or Custom launch. From there:
•
Select Line Lock, then press the brake pedal firmly to move the bar graph to 100%
•
Release the brake pedal. There are 15 seconds to complete the burnout and exit
•
To release the brakes and roll out, press the tachometer symbol and SEL at the same time
For full details, see the Owner's Manual.
(First) gear for manual transmission • The parking brake must not
st