Discount Car Stereo A2D-CHRY98 Skrócona instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji dla Samochodowy system stereo Discount Car Stereo A2D-CHRY98. Discount Car Stereo A2D-CHRY98 4 stron. For chrysler radios with cd-c button

Drukuj stronę

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Requirement

Radio with 8-pin CD changer port and CD-C button

Introduction

Many with older cars looking for a simply way to play audio devices without

replacing the radio will be pleased to find this solution. The A2D-CHRY98 adapter

provides a Wireless music streaming solution for Smartphone, Kindle, Tablet

with A2DP profile. A wireless connection means no wires, clutter or complicated

setup. The A2D-CHRY98 works in 1999-01 Chrysler radios with CDC-C button

and connects to radio 8-pin port which guarantees to best possible sound. CD

changer (if present) must be disconnected.

See Frequently Asked question at the end of this guide for details.

Installation

Radio must be removed from dashboard to gain access to the connectors.

Vehicle specific radio removal is not part of this guide; however, these may be

available upon request.

Disconnect any factory option (e.g., CD changer) from radio

2. Connect module 8-pin plug (See Fig. 1) to radio 8-pin connector (See

Fig. 2)

3. Connect/splice/Tap red wire (See Fig. 3) to a 12V accessory (switched)

4. Secure module

5. Proceed to "Pairing"

Fig. 1

8-pin plug

Fig. 2

supply in vehicle. 12V accessory or switched supply is available on

radio harness.

Warning: Avoid connecting 12V accessory wire to battery (always on)

supply.

Fig. 3