Acorn Safety S0702 Instrukcja instalacji, obsługi i konserwacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Sprzęt bezpieczeństwa Acorn Safety S0702. Acorn Safety S0702 5 stron. Drench hoses

Installation & Operation Manual

INSTALLATION INSTRUCTIONS:

Supplies required: (not provided by Acorn)
1. Wall fasteners, washers, anchors and screws.
2. Pipe sealant or Teflon tape for sealing water
connections.
IMPORTANT: flush water supply lines prior to
connection to safety equipment
Notes:
Use hand tools and wrenches in a manner which will
prevent marring finished surfaces. Strap wrenches or
tools with plastic jaw linings are highly recommended.
Refer to Rough-in for location of supply and drain lines.
Fragments of Teflon tape or pipe sealant residue can
interfere with the proper operation of this unit. Ensure
pipe sealant methods do not cause contamination in
the system.
STEP ONE: MOUNTING
1. Determine desired mounting location and drill 1 3/8"
DIA. mounting hole through counter top.
2. Insert deck escutcheon through hole and secure in
place with washer and retaining nut (provided) from
underneath counter top.
3. Insert drench hose assembly down into mounted
escutcheon.
STEP TWO: SUPPLY LINE
1. Install water line (supplied by others) in close proximity
to drench hose location.
2. Connect 3/8" NPT reinforced hose (supplied with
drench
hose) to plumbed water supply.
3. Open water supply.
4. Test for leaks, proper operation and flow.
STEP THREE: SIGNAGE & INSPECTION
1. Position sign with clear visibility, in close proximity to
safety equipment and mark mounting hole locations.
2. Select appropriate 1/4" anchors, screws and washers
(Supplied by others) to install signage.
3. Attach inspection tag supplied, with plastic zip tie.
Acorn Safety
a division of Acorn Engineering
Manual #7109-503-001
MOUNTING HARDWARE
(PROVIDED BY
INSTALLER)
DRENCH HOSE
ASSEMBLY
DECK
ESCUTCHEON
Company
Page 3 of 5
3/8" NPT FITTING
CONNECT TO
WATER LINE
(SUPPLIED BY
INSTALLER)
Revised: 03/22/13