Discount Car Stereo A2DIY-BKRCD Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Samochodowy system stereo Discount Car Stereo A2DIY-BKRCD. Discount Car Stereo A2DIY-BKRCD 9 stron. Hands free, music streaming for becker radios and separate cd changer

Drukuj stronę

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY



This installation guide is provided as a GENERAL installation guide; some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.



We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage



Requirement

Functional CD changer in trunk or hatch

Introduction

Safety comes first when you're on the road, so having an intuitive and easy to

use Bluetooth kit is essential to reducing driver distraction. The A2DIY-BKRCD

works with virtually all Bluetooth enabled phones and sounds great whether

using for mobile conversations, streaming music and retaining use of required

CD changer. Keep vehicle, radio and CD changer while enjoying Bluetooth

features only available on newer cars.

Note: A working CD changer required and at least one disc must remain in

magazine. If vehicle does not have a functioning CD changer, purchase our

A2DIY-BKR

instead.

Installation

Warning: Most Becker radios are coded and will not operate without the

code. Do not proceed to step 4 if radio code is not available otherwise radio

will not operate upon reconnection.

Remove radio from dash to gain access to the connectors. A set of

removal tools (See Fig. 1) is required.

BRRT

Radio removal tools

2. Slide tools into radio slots (51) with straight edge facing away.

Withdraw radio by pulling outwards. With radio removed, press

retaining spring to release keys. See Fig. 2.

For detailed radio removal instructions, click here.

3. Disconnect BLUE plug from radio C-3 chamber (See Fig. 3) (pinch blue

tab to release)

GRRT

Fig. 1

Fig. 2