Discount Car Stereo JAG-HF Skrócona instrukcja instalacji Bluetooth - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji Bluetooth dla Samochodowy system stereo Discount Car Stereo JAG-HF. Discount Car Stereo JAG-HF 10 stron. Bluetooth kit for jaguar xk and xj with cd changer
Również dla Discount Car Stereo JAG-HF: Instrukcja instalacji (10 strony), Skrócona instrukcja obsługi (10 strony)

Drukuj stronę

Factory connector/Plug

Ignition supply wire

10-pin Female (white)

Pin 10 (light green)

10-pin Male (yellow)

Pin 10 (white/green)

14-pin (yellow)

Pin 13 (Green)

18-pin male (yellow)

Pin 5 (Green)

If vehicle does not have a phone plug, simply tap into cigar lighter

supply wires under console: White/Blue= 12V ACC, Black=Ground.

Fig. 12

2. Connect 3.5mm audio plug (routed from trunk) to Bluetooth Module

audio jack (See Fig. 13)

Fig. 13

Audio out Jack

3. Connect supplied (3ft.) audio cable (See Fig. 14) to Bluetooth module

"AUX" input jack, (See Fig. 15) and route other end to dash area or

location where audio device will reside (within 3ft).

Ground wire

Pin 6 (black)

Pin 11n (black)

Pin 11 (black)

Fig. 14

3ft. audio cable

Fig. 15

Bluetooth module

4. Connect control/mic plug (See Fig . 16) Bluetooth Module "Mic" input

(See Fig. 15)

Fig. 16

Control button/Microphone

5. Consider where to install control/mic button. Keep in mind the control

button must be within reach of the driver and facing driver for voice

commands and phone dialog (cable is 6ft. long). We recommend

completing the rest of the install prior to securing the

control/mic button to the dash. Once you decide on a location simply

remove tape backing (See Fig. 17) and stick to dash (See Fig. 18)