Discount Car Stereo A2DIY-GM1 Skrócona instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji dla Akcesoria samochodowe Discount Car Stereo A2DIY-GM1. Discount Car Stereo A2DIY-GM1 8 stron. For select 1995-05 gm

Drukuj stronę

4. If vehicle is equipped with "BOSE"; re-connect factory 9-pin plug

(removed from radio in step 2) to 9-in connector (white) on install

harness

Separate player (single CD or Tape player in lower dash); remain

disconnected. Install harness 9-pin connector (white) remains empty

except if vehicle has BOSE.

5. Auxiliary input connection: Connect supplied 3.5mm audio cable (See

Fig. 4) to module "AUX" jack. Route cable other end to front of dash or

wherever Aux device will reside (within 3 ft.) This step is optional.

Fig. 4

6. Install microphone (See Fig. 5) to vehicles visor or headliner using

included visor clip (See Fig. 6).

Fig. 5

Microphone

7. Carefully route microphones 3.5mm plug down pillar and behind the

dash and plug into module "MIC" input jack (See Fig. 3)

Fig. 6

Visor clip

Fig. 7