Discount Car Stereo A2DIY-GM3 Skrócona instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji dla Akcesoria samochodowe Discount Car Stereo A2DIY-GM3. Discount Car Stereo A2DIY-GM3 7 stron. For select 2000-07 gm class ii

Drukuj stronę

Introduction:

Safety comes first when you're on the road, so having an intuitive and easy to use

Bluetooth kit is essential to reducing driver distraction. The A2DIY-GM3 works on

select 2000-09 GM Class-II radios with "CD/AUX" or "TAPE/AUX" button and

compatible with virtually all Bluetooth phones, and sounds great whether using for

mobile conversations, streaming music or AUX input device,

"TAPE/CD" button are not compatible with this module).

Also includes a wireless remote control and push-to-talk button. An optional USB

charging port is available to keep power hungry devices charged. Thanks to the

A2DIY-GM3 users keep the radio while enjoying Bluetooth features only available

on newer cars.

The A2DIY-GM3 replaces XM, remote/external CD changer

Changer built-into radio remains functional. To retain these options, purchase our

A2DIY-GM3x

instead.

See Frequently Asked question at the end of this guide for more details.

Installation:

Radio must be removed from dash (Vehicle specific radio removal instructions

are not part of this guide, but available upon request)

Disconnect factory 12-pin plug from radio (if present) (See Fig. 1)

GM Class-II radio plugs

(Radios with

(if present). The CD

Fig. 1

2. Connect installation harness 12-pin plug (See Fig. 2) to radio 12-ppin

connector vacated in step 1

Fig. 2

installation harness

Factory 12-pin plug (if present) remains disconnected and 12-pin gray

connector on installation harness remains empty.

3. Connect installation harness yellow wire to battery (always on) supply

and black wire to ground.

4. Connect installation harness 22-pin Molex plug (See Fig. 2) to module 22-

pin Molex connector (See Fig. 3)

Fig. 3