BLADEZ ION 150 Podręcznik produktu - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik produktu dla Skuter BLADEZ ION 150. BLADEZ ION 150 13 stron. Electric power board
Również dla BLADEZ ION 150: Procedury rozwiązywania problemów (12 strony)

Drukuj stronę

Riding

1. Make sure that all of the bolts and screws are tightened.

2. Raise the kickstand to its upright position.

3. The ION does not have an on/off switch. To ride, put one foot on the deck of the

ION. After pushing off with the other foot, squeeze the ACCELERATOR LEVER on

the right side of the handlebars. The Power Board will begin to move under its own

power. You must reach approximately 2 mph to activate the motor.

4. To stop, release the accelerator handle and depress the BRAKE LEVER (on the left

side of the handlebars). Depressing the brake will temporarily disengage power to

the motor.

5. When you feel your Power Board moving slow, sluggish or running out of power, it is

time to recharge. (See charging instructions on page 7)

* Note that there is still a charge in the batteries but it is not advisable to fully discharge

the batteries.

FOLDING AND STORAGE

Fig. 5

Fig. 6

1. To fold your Power Board. Using one

hand, gently pull up on the Folding

Handle, while lowering the handlebars

with the other (Fig. 5).

2. Lock the unit into the folded position

using the handlebar security clip (Fig.

6).