Blagdon AMPHIBIOUS Series Ulotka - Strona 13
Przeglądaj online lub pobierz pdf Ulotka dla Pompy do oczek wodnych Blagdon AMPHIBIOUS Series. Blagdon AMPHIBIOUS Series 16 stron.
Drukuj stronę
- 1. Table of Contents
- 2. Getting to Know Your Amphibious Pump
- 3. Pump Performance / Flow Charts
- 4. Technical Specifications
- 5. Installation
- 6. Electrical Installation
- 7. Maintenance and Cleaning
- 8. Cleaning
- 9. Routine Maintenance
- 10. Monthly Maintenance
- 11. Annual Maintenance
- 12. Winter Storage
- 13. Troubleshooting
- 14. Faults - Problem Procedure
- 15. Consumer Advice Contact Details
- 16. Guarantee
Amphibious Pump Leaflet 2.qxd
30/3/06
13:33
Page 13
MAINTENANCE & CLEANING
Annual Maintenance
Following as for routine and monthly maintenance, once a year you should
service your pump by using Blagdon Pond Pump Cleaner, (this may need to be
done more frequently in hard water areas).
Dismantle pump and examine all parts for wear or damage, replacing any
parts that show obvious wear and/or damage. (See "Getting to know your
Amphibious Pump" for parts/description and replacement parts codes.)
Particular care should be taken to examine the cable entry point and the cable;
if there is any sign of damage the pump should be discarded and safely
disposed of.
Winter Storage
The pump can be run in the pond during the winter but care should be taken
to ensure that it is fully immersed and cannot freeze solid. If the pump is not
used during the winter, follow annual maintenance procedure and store frost-
free in the house or garage until spring.
All maintenance outlined in this booklet must be carried out by competent
personel.
The Amphibious Pump is suitable for use in garden ponds at water
temperatures above freezing and below 35˚C.
11