DISCOVER Adapt 20 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zestawy słuchawkowe DISCOVER Adapt 20. DISCOVER Adapt 20 13 stron.

Turning the Headset On and Off

Turn on the headset

Press and hold the answer button for 2 seconds. Release the

button when the purple LED flashes 3 times and "Power on"

voice notification is heard in the speaker.

Turn off the headset

Press and hold the answer button for 3 seconds. Release the

button when the purple LED flashes once and "Power off"

voice notification is heard in the speaker.

Pairing

Prior to using the headset, it must be paired and connected to

another Bluetooth device, such as a mobile phone. For specific

instructions, check the user guide of your phone.

General procedure

• Turn on the Bluetooth function on your phone.

• Put the headset in pairing mode (make sure the headset

is switched on, press and hold the pairing button for

4 seconds until the blue LED flashes rapidly)

• Perform a search for Bluetooth devices on your phone.

• Connect to >>Adapt 20<< when found.

• Blue LED is On and "Connected" voice notification is heard

in the speaker when pairing is completed.

Different smart phones have different ways to handle

Bluetooth devices. Read the user manual of your phone for

more information. Some phones will connect to the headset

automatically when it is within range, for example when you

return to your office. For other phones, it may be necessary to

reconnect manually when the connection has been broken.

The pairing mode is active for 3 minutes. After that, the

headset will enter standby mode. If you want to cancel the

pairing mode, press the answer button and then "Pairing

Cancel" voice notification can be heard.

Answer button

Pairing button