3D AEROWORKS TRACER 2000 Instrukcja montażu i instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja montażu i instrukcja obsługi dla Samoloty 3D AEROWORKS TRACER 2000. 3D AEROWORKS TRACER 2000 19 stron. Thermal glider

Drukuj stronę

OVERVIEW:

This blend of thermal soarer and hotliner is bound to turn some heads at the local flying field.

Designed for quick and easy construction printed in PLA. Designed to suit the 2836 1500kv

outrunner on an 8x4 folding propeller. Utilising ailerons and a V-tail rudder/elevator, this

model flies like it is on rails. With an extremely thin wing profile and sleek fuselage, the

Tracer 2000 has a fantastic glide ratio and penetrates strong wings easily. Links to

components used can be found on the last page of the user guide.

This model has taken many hours of hard work and testing in order to provide a nice flying

aircraft. Please do not share it. Please show your appreciation by directing interested parties

to the link below.

https://cults3d.com/en/3d-model/various/tracer-2000-thermal-glider-3d_aeroworks

GENERAL SPECIFICATIONS

WINGSPAN:

PRINT TIME:

PRINT COST:

PRINT WEIGHT:

FLYING WEIGHT:

ELECTRICS

MOTOR:

ESC:

SERVOS:

BATTERY:

INCLUDED:

STL FILES OF ALL COMPONENTS (scale to 1000% if not using S3D)

FACTORY FILES FOR (S3D) SIMPLIFY 3D FOR PRINTERS:

2000mm

80 hrs

$10 USD

630g

1030g

2836 1500KV

40 amp

x2 slim 10g

2200mah 3s (or similar)

200x200200