Blake UK PROception The Bridge Instrukcja konfiguracji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Bezprzewodowy punkt dostępowy Blake UK PROception The Bridge. Blake UK PROception The Bridge 13 stron. 24v outdoor cpe
Drukuj stronęSet-up Guide (24v OUTDOOR CPE)
CPE The Bridge
Country Region MUST be set to ETSI (For the UK channel allocation)
Multicast Fast: - Provides the ability to minimize packet loss in a network when there is a link or node
failure by enhancing, but not changing, multicast routing
protocols.
Maximum per AP: - Number of permitted on the AP. Prevents over loading and therefore slowing
down of the AP
WLAN Partition: - For security. Enabling WLAN Partition prevents associated wireless clients from
communicating with each other.
Short GI: - Short Guard Interval can increases the data rate by up to 10%.
Coverage threshold: - The signal level at the point where the AP drops the device.
TX power: - Careful setting of this can reduce the channel overlap and degrading of the Wi-Fi signal if
using with more than one AP.
DFS:- When support for DFS is enabled, it will be necessary for WiFi access points to verify that any
radar in proximity is not using DFS frequencies. This process is called Channel Availability Check, and
it's executed during the boot process of the access point (AP) as well as during its normal operations.