Cubby Bed Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wyposażenie wnętrz Cubby Bed. Cubby Bed 17 stron.
Drukuj stronę
1
Slide pole #2 through connectors #9 so that the connector sits above the bolt.
Repeat with connector #10. The connector tabs should be on the inside. Insert pole
#4 into #9 and #10 connectors and orient like below. Insert four #20 screws into the
#9 and #10 connectors and tighten with #19 hex key. Repeat to make two sets
2
4
10
2
Insert #3 poles into #7 straight connector, align Velcro, and tighten #20 screws
with #19 hex key. Repeat for the other set. Insert tube you just assembled into #9
and #10 connectors, aligning the Velcro so it's facing down. Repeat on the other
side. Tighten #20 screw on #9 and #10 connectors with #19 hex key.
7
3
Push Poles all the
way into connectors
6
9
10
rests above bolt
Tab on
inside
9
Connector
Connector sits
above bolt on vertical
pole