ARO PP30A Series Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna ARO PP30A Series. ARO PP30A Series 13 stron. 3" dry powder diaphragm pump
Drukuj stronę
637303-XX fluid section service kits include: Balls (item 22), diaphragms (item 7), and items 3, 70, 144, 175, 196 (listed below) plus
items 174 and 94276 Lubriplate® FML-2 grease (page 8).
SEAT OPTIONS
PP30A-XXX-XXX
"21"
-XXX Seat
Qty [Mtl]
-AXX 94104-A
(4)
[Sp]
MANIFOLD CONNECTION / FLUID CAP MATERIAL OPTIONS PP30A-XXX-XXX
Item Description
(size)
6 Diaphragm Washer
15 Fluid Cap
60 Inlet Manifold
61 Outlet Manifold
EXTERNAL HARDWARE OPTIONS PP30A-XXX-XXX
Item Description
(size)
26 Screw
(M12 x 1.75 - 6g x 45 mm)
27 Screw
(M12 x 1.75 - 6g x 60 mm)
29 Nut
(M12 x 1.75 - 6h)
Item
Description
(size)
1 Rod
3 "O" Ring
(1/8" x 1" OD)
5 Back-Up Washer
9 Washer
(3/16" ID x 2" OD x 5/32")
14 Cap Screw
(3/4" - 16 x 3-1/4")
68 Air Cap
69 Air Cap
70 Gasket
74 Pipe Plug
(1/4 - 18 NPT x 7/16")
Air motor Kit parts, see pages 8 and 9.
FLUID SECTION DISASSEMBLY
1. Remove (61) outlet manifold and (60) inlet manifold.
2. Remove (22) balls and (21) seats.
3. Remove (15) fluid caps.
4. Remove (14) cap screw, (6) diaphragm washer, (7) dia-
phragm and (5) back-up washer.
NOTE: Do not scratch or mar the surface of (1) diaphragm
rod.
Page 6 of 12
PARTS LIST / PP30A-XXX-XXX FLUID SECTION
BALL OPTIONS
PP30A-XXX-XXX
"22"
(3-1/4" diameter)
-XXX Ball
Qty [Mtl]
-XAX 94103-A
(4)
N.P.T.
PP30A-AAX-XXX
Qty Part No.
(2) 94802
(2) 94768
(1) 94913
(1) 94766
PP30A-XXP-XXX
Qty Part No.
[Mtl] Part No.
(12) 94412-1
[C]
(16) 94991-1
[C]
(16) 95053-1
[C]
PARTS LIST
Qty Part No.
[Mtl]
(1) 97387
[C]
(2) Y328-210
[T]
(2) 94831-1
[C]
(2) Y13-12-T
[SS]
(2) Y5-134-T
[SS]
(1) 94030-4
[A]
(1) 94030-5
[A]
(2) 94100
[B]
(1) Y17-51-N
[C]
DIAPHRAGM OPTIONS
PP30A-XXX-XXX
-XXX Diaphragm
[Sp]
-XXA 94091-A
Aluminum
BSP
PP30A-BAX-XXX
[Mtl] Part No.
[Mtl] Part No.
[A]
94802
[A]
[A]
94768
[A]
[A]
94913-2
[A]
[A]
94766-2
[A]
PP30A-XXS-XXX
[Mtl]
94412-2
[SS]
94991
[SS]
95053
[SS]
Item
Description
(size)
79 Ground Kit Assembly
shown)
131 Screw
(M10 x 1.5 - 6g x 120 mm)
144 "U" Cup
(3/16" x 1-3/8" OD)
175 "O" Ring
(3/32" x 1" OD)
180 Washer
(0.406" ID x 0.031" thick)
196 Cushion
250 Screw, Self-Tapping
1/2")
FLUID SECTION REASSEMBLY
Reassemble in reverse order. Refer to the torque require-
y
ments on page 7.
Clean and inspect all parts. Replace worn or damaged
y
parts with new parts as required.
Lubricate (1) diaphragm rod and (144) "U" cups with Lu-
y
briplate FML-2 grease (94276 grease packet is included in
service kit).
Examine torque settings after pump has been re-started
y
and run a while.
"7"
Qty [Mtl]
(2)
[Sp]
Stainless Steel
N.P.T.
BSP
PP30A-ASX-XXX
PP30A-BSX-XXX
[Mtl] Part No.
94803
[SS] 94803
94815
[SS] 94815
94212-1
[SS] 94212-2
94818
[SS] 94818-2
MATERIAL CODE
[A] = Aluminum
[B] = Nitrile
[C] = Carbon Steel
[Co] = Copper
[Sp] = Santoprene
[SS] = Stainless Steel
[T] = PTFE
Qty Part No.
(1) 94829
(not
(4) 94531
(2) Y186-51
(2) Y325-117
(4) 94098
(2) 94631
(2) Y334-104-C [C]
(1/4" - 14 x
PP30A-XXX-XXX (en)
[Mtl]
[SS]
[SS]
[SS]
[SS]
[Mtl]
- - -
[C]
[B]
[B]
[Co]
[Sp]