ARO SRB21A-10-P Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wkrętak sieciowy ARO SRB21A-10-P. ARO SRB21A-10-P 8 stron. 20 series right-angle screwdriver
DISASSEMBLY/ASSEMBLY
INSTRUCTIONS
M32
3
_
Remove "O" ring (11) and reverse sleeve (12) releasing valve
_
Grease and assemble
"0" ring (19) to cap (20).
body (16) and spring (15).
_
Assemble valve stem (17) and spring (18) to housing, secur-
ing with cap (20). NOTE: Assemble valve stem (17) with slot
HOUSING
ASSEMBLY
turned to accept valve assembly
(8).
-
Assemble filler (6) and exhaust cap (5) to housing, aligning le-
-
Assemble spring (15) to housing, securing with valve body (16).
ver (22) with valve stem (17).
_
Assemble
reverse sleeve (12) and "0" ring (11) to housing,
_
Assemble valve assembly (8) to housing, being certain valve
securing valve body (16).
assembly
seats in slot in valve stem (17).
-
Grease and assemble "0" ring (9) to valve block (10) and as-
_
Assemble spring (7) to housing, securing with diffuser washer
semble valve block to housing. NOTE: Assemble with coun-
(4) spacer (3) and inlet adapter (2).
terbore towards cap (20).
_
Clean and install screen (1) in inlet adapter.
SRB21A-17-P
1700
6.67:1
I
48236-1 (65)
7