ARO 8475-A-EU Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Szlifierka ARO 8475-A-EU. ARO 8475-A-EU 12 stron. “000-1” series
Drukuj stronęVALVE SECTION
Ml0
32
0 43160 LEVER FOR NON -EU MODELS
0 45953 LEVER ASS'Y FOR -EU MODELS
Cl * LEVER
- ROLL PIN Yl78-44
__o__I
ROLL PIN Yl78-216
r
,
BUT
HOUSING431761
(BUlTON
THROTTLE)
------ROLL
PIN Yl78-211
(BUTTON
THROTTLE)
HOUSING 43161
(LEVER THROlTLE,
NON -EU)
(LEVER
-
VALVE 43170
V~UTTON
THROTTLE)
.TON 43169
SPRING 31125-----@
v
REGULATOR 43157
GASKET 43159
"O"RlNG
Y325-8
ifiE?EtNi~G
LABEL (NON -EU MODELS)
49863 WARNING
LABEL (-EU MODELS)
SCREW 43,56
* NOT INCLUDED
IN THROTTLE
ASSEMBLY
43174 LEVER THROTTLE ASSEMBLY (NON -EU MODELSJ
49909 LEVER THROl?LEqASSFMBLY MU MODELQ
43173 BUTTON THROllLE ASSEMBLY
DISASSEMBLY
ASSEMBLY
a. Remove screw (43158) and gasket (43159).
a. Assemble "O" ring (Y325-6) and spring (31125) to valve and
b. Air regulator, with "O" ring (Y325-8) and spring (31125) are
assemble to housing. Button Throttle Models: Secure valve
free to be removed.
with button (43169) and roll pin (Y178-216).
b. Assemble "O" ring (Y325-8) to regulator (43157) and as-
c. Lever Throttle Models: Valve (39382), with "O" ring (Y325-6),
is also free to be removed.
semble regulator to housing, aligning hole in side of regulator
with air inlet of housing. Secure with gasket (43159) and
d. Button Throttle Models: Remove roll pin (Y178-216) and but-
screw (43158).
ton (43169) to remove valve (43170) with "O" ring (Y325-6).
WRENCHES FURNISHED
30131
WRENCH