3D Hobby Shop SLICK 540 Instrukcja montażu - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Zabawka 3D Hobby Shop SLICK 540. 3D Hobby Shop SLICK 540 19 stron.

PULL-PULL Cable and rudder servo installation.

Remove the covering over the control horn slot in the rudder in the location shown and install the double-

sided pull-pull control horn in the rudder with medium or thick CA glue. The cables are already in-place in

the fuselage.

Please examine the pull-pull system assembly diagram closely: