Cube RAW Split Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Cube RAW Split. Cube RAW Split 5 stron.

Step 10: Adjust the frame according to the guiding lines in the large plate while securing that the plates are adjacent

to each other and are aligned on each side. Secure it with two screws.

Finally secure with two screws on the other side.

Tighten all screws. Now the frame is assembled and finished.

Step 11: Mount the cable tray. The cable tray is mounted on the small plate with screws. Place it as shown on the

pictures above - in the center of the plate up against the edge where the table can be split.

Connect the control box and mount the control panel.

The table is now assembled. Turn it over while making sure that the plates do not slide apart.

CUBE

Finished, enjoy the table.

D E S I G N

Cube Design A/S

Vadstedvej 212 | DK-8450 Hammel | Tlf./Phone no.: +45 86 98 74 11 | www.cube-design.dk/en | [email protected]