Cube Design 5202ECO Podręcznik
Przeglądaj online lub pobierz pdf Podręcznik dla Wyposażenie wnętrz Cube Design 5202ECO. Cube Design 5202ECO 2 stron. Quadro pull-out cabinet
Drukuj stronę5202ECO
a product by Cube Design
Phone no.:
+45 86 98 74 11
E-mail:
Website:
www.cube-design.dk/en
Warranty:
Use:
Only for indoor use
Test:
EN16121+EN16122
Product description:
Pull-out cabinet for storing folders,
books etc. made of chipboard lined
with laminate and 2 mm ABS edges.
NOTE: You can always contact Cube
Design for spare parts for your pull-out
cabinet or other Cube products.
No biocides or disinfectants have been
used on this product.
Design for disassembly
0
Disassembly tools:
1x flat-head screwdriver
1x Phillips screwdriver
1x rubber hammer
2
Remove the metal logo
with the screwdriver.
Remove the list at the top
by unscrewing the seven
screws with the Phillips
screwdriver.
Vadstedvej 212 | DK-8450 Hammel | Phone no.: +45 86 98 74 11 | [email protected] | www.cube-design.dk/en
Quadro pull-out cabinet
10 years
1
Pull out the pull-out cabinet to the outer position.
Use both hands to release the clutch under the cabinet.
Now the two parts can be seperated.
3
Pull the felt off the list.
Cube Design A/S
4
Remove both pull-out
brackets by unscrewing
the four screws from each
bracket with the Phillips
screwdriver.
5
Lay the box on the side.
Remove the feet by un-
screwing the three screws
from each foot with the
Phillips screwdriver.
Continued on the back ►