CUBETAPE 190 Series Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przyrządy pomiarowe CUBETAPE 190 Series. CUBETAPE 190 Series 4 stron.

Cubetape has a number of special commands for Transport and Logistics users:

Insert Pallet

in the length field pressing ENTER with the tape home inserts the standard pallet length and width.

See your administrator to turn this off or to change the pallet dimensions.

Same as Last

in the length field pressing SEND inserts the last recorded L,W,H measurements

Append

in the length field pressing SAVE enables the operator to measure items longer than the 3 metre

tape. Sequence is: measure length 1 SAVE, measure length 2 ENTER. This now records the sum of

length 1 and length 2 in the Length field.

To charge the battery, connect Cubetape to a PC using the mini USB connector. The charge light will

come on while the battery is being charged. The tape cassette and the battery can be changed by

removing the rear cover. The recommended way to remove the rear cover is with an index finger

just under the tape tip. The cassette will pop out if you extract the tape a few cm, and turn the

Cubetape over.

Index

Finger

ParcelTools Pty Ltd

Rechargeable

Battery

Tape

Cassette

Page 2