3D Hobby Shop Extra SHP 47" Instrukcja montażu - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Samoloty 3D Hobby Shop Extra SHP 47". 3D Hobby Shop Extra SHP 47" 20 stron. Arf rc

Drukuj stronę
15
Install your receiver onto the receiver mount in the fuselage as shown using Velcro or a Zip-tie.
The cowl mounts using 4 small wood screws which screw through the cowl into small plywood rectangles
at the front of the fuselage. In order to know where to make the holes in the cowl for the screws, place
tape strips on the fuselage over the plywood as shown.
Install cowl and align, use tape to hold the cowl in position while you work. Use the tape strips to locate
the position for the holes in the cowl. Use a small drill or a hobby knife to make holes in the cowl.