3D Hobby Shop Extra SHP 47" Instrukcja montażu - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Samoloty 3D Hobby Shop Extra SHP 47". 3D Hobby Shop Extra SHP 47" 20 stron. Arf rc

Always obtain proper insurance before flying – contact the AMA at

www.modelaircraft.org

REQUIRED ITEMS

CA Glue – Thin and Medium

CA accelerator and debonder

Hobby Knife

Set Metric Allen Wrenches

Phillips screwdriver

Scissors

Small Pliers

Wire Cutters

Rubbing alcohol

Paper towel

Optional – Heat Gun

Blue Loctite thread locking compound

Assembly Instructions – Read completely before starting assembly!

NOTE: 3DHobbyShop has online build videos for this aircraft hosted at

www.vimeo.com

and linked on the 3DHobbyShop website. If you have problems

locating the build videos, contact 3DHobbyShop for assistance or consult

www.RCGroups.com

for the latest information on build videos and other news

about the 47" Extra SHP.

Unpack your airplane and examine the components. Check for damage of any kind. If you have

damage, please contact 3DHobbyShop to discuss.

WRINKLES

Your airplane was packed in plastic at the factory without any wrinkles in the covering. You may notice

some wrinkles now; more likely, you will notice a few in a day or two or the first time you take the plane

out to the flying field. These wrinkles are the result of wood shrinkage and/or expansion. Wrinkles may

be removed with the gentle application of heat to the covering material on your airplane. The best tool to

use is a heat gun. Apply the heat gently: the covering material will shrink as you apply the heat, and this

will remove the wrinkles. BE CAREFUL! Too much heat applied too quickly can damage the covering,

either by causing it to pull away from the wood at seams and corners or even by melting it. The covering

will shrink at low temperature with patient application of heat. Wrinkles in the covering DO NOT affect

flight performance.

Remove the canopy before attempting to use heat on your covering! The canopy is made of thermo-

activated plastic and WILL deform with the application of heat. Do not apply heat to the canopy.

PAINT

If you need to clean your airplane, we recommend using a damp towel. The paint used on the canopy

and cowl is not safe for all cleaners.