Discovery Telecom 4450101 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Discovery Telecom 4450101. Discovery Telecom 4450101 8 stron. 900x power microscope biological experiments gear
Drukuj stronęHow Do I Use My Microscope
Before you use your microscope, make sure that the table, desk or surface that
you place it on is stable and is not subject to vibration. If the microscope needs
to be moved, hold it by the arm and base while carefully transferring it. Once
the microscope is in a suitable location and the batteries are installed, check
the light source to make sure that it illuminates. Use a microfiber cleaning
cloth to gently wipe the lenses off. If the stage is dirty with dust or oil, carefully
clean it off. Make sure that you only raise and lower the stage using the focus
adjustment knob.
How Do I Operate The Illumation?
Locate the mirror/light on the base of the microscope. Flip the mirror/light
to the "on" position (with the light facing up) and the light will illuminate.
This microscope is equipped with an incandescent light that illuminates the
specimen from below. The colour filter wheel is located in the middle of the
microscope stage. The filters help you when you observing very bright or clear
specimens. Using these filters, you can choose various brightness levels and
colours. This helps you better recognize the components of colourless or
transparent objects (e.g. sea salt).
How Do I Adjust My Microscope Correctly?
Place the microscope in a suitable location as described above, and sit in a
comfortable viewing position. Always start each observation with the lowest
magnification. Adjust the distance of the microscope stage so that the stage is
in the lowest position — farthest away from the turret head. Turn the objective
turret until it clicks into place at the lowest magnification (Objective: 5x/
Magnification: 100x). Note: Before you change the objective setting, always
make sure the microscope stage is farthest away from the turret by rotating
the focus knob. Separating the stage and turret by rotating the focus knob will
avoid causing damage to the specimen slide or microscope. When starting an
observation, always start with the 5x objective in the rotating head.
4