3D innovations MagneTrainer-ER Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rower treningowy 3D innovations MagneTrainer-ER. 3D innovations MagneTrainer-ER 12 stron. Extended range
Drukuj stronę
- 1. Table of Contents
- 2. Cautions and Safety
- 3. Assembling Your Magnetrainer
- 4. Using the Magnetrainer with Your Legs
- 5. Using the Magnetrainer with Your Arms
- 6. Adjusting the Pedal Resistance
- 7. Keeping the Bike in Place
- 8. Using the Display
- 9. Care and Maintenance
- 10. Spare Parts
- 11. Support
- 12. Contact
- 13. Optional Accessories
- 14. Free Software
- 15. Warranty
Using the Display
How to Read the Display
There are two numbers displayed on the
monitor, one on the top and one on the bottom.
Top Number:
The top number always displays your pedal
speed, in miles per hour.
Bottom Number:
The bottom number can display Distance,
Calories or Time.
The Function Button
Press this button to change what is displayed by
the bottom number. Each time you press the
Function Button the Indicator Arrow moves
between,
TIME (total Time pedaled),
DIST (total Distance pedaled, in miles),
CAL (total Calories burned),
SCAN.
The Indicator Arrow points to the function that is being displayed. For example, in the picture
the Indicator Arrow is pointing to DIST, so the lower number displays the total distance
pedaled.
What is SCAN?
When SCAN is selected, the lower number will cycle between displaying Time, Distance and
Calories. Each will be displayed for about 6 seconds. Another Indicator Arrow will point to the
function (Time, Distance or Calories) that is being displayed.
How to Reset Total Time, Total Distance and Calories
Time, Distance and Calories are accumulated as you pedal. To reset these all to zero, press
and hold the Function Button for at least 3 seconds.
How to Turn the Display On and Off
The display turns on automatically when you pedal the bike. You can also turn the display on
by pressing the Function Button. You do not need to turn the display off. It will turn off
automatically a few minutes after you stop pedaling.
Are the Calories on the Display Accurate?
Only if the pedal resistance is at maximum. All mini exercise bikes (and many full-sized bikes)
do not measure the power put into the bike. Measuring power is very expensive, but it is
needed for a reasonable calculation.
How to Get Accurate Calorie Counts
We've created a free Calorie Calculator (see the section Free Software) which solves this
problem. It uses your gender, height, weight, age, pedal speed and the MagneTrainer knob
setting to calculate calories burned. It also calculates the wattage of the bike from the
resistance knob position and your pedal speed. See the section Free Software for more
information.
6