3D LabPrint Avion Airplanes Duck Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zabawka 3D LabPrint Avion Airplanes Duck. 3D LabPrint Avion Airplanes Duck 13 stron.

Avion

airplanes

Center of gravity

CG is marked on

W_L_1

and

W_R_1

very tip of the

F_1

part. After maiden flight you can shift CG slightly front or back

to fit your flying style perfectly. Don't shift CG position too much at once, wing

can lose it's stability. It is also possible to change a little bit angle of the motor

with small washers to adjust behavior of the wing during flight. (It is a bit tricky

with assembled wing, but it is possible)

Elevons setup

Aileron

Elevator

Aileron + elevator

DUCK user manual

on the bottom side and it is 206mm from the

+14 mm

-14 mm

+14 mm

-14 mm

+28 mm

-28 mm

Before first flight

Make sure, that your battery is properly charged. Check position of CG and

elevon mix. Good luck.

Always fly in safe zone and in good conditions. In case of accident designer or

seller is not responsible for incurred damages.

Thank you for purchasing my product and thereby supporting me in further

creation.

Please do not share your files with friends or other people.

Flight video

Avion Airplanes

avion_airplanes