Aroma AWK-165M Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Czajnik Aroma AWK-165M. Aroma AWK-165M 7 stron. Glass electric kettle

Drukuj stronę

To Heat/Boil Water

1. Place power base on a sturdy, level and dry

surface.

2. Open the kettle lid and fill with water through

opening. Water must be filled between the Min

and Max levels.

3. Close the lid, ensuring it locks into place.

4. Place the kettle onto the power base.

5. Turn dial to desired heating or boiling setting. The

dial will click when turned to the Boil setting.

6. Plug the power cord into an available 120V AC

wall outlet.

7. Press down on the power switch to turn On.

The switch will illuminate and the kettle will begin

heating the water.

8. Once the water reaches a boil, the power switch

will rise up and the kettle will automatically shut

off.

9. Using the cool-touch handle, lift the kettle off the

power base to serve. Do not touch the stainless

steel or glass body, as it will be hot.

10. When finished serving, pour out any remaining

water and unplug the power cord.

Hard water can leave mineral deposits

that create scale build-up on the interior

of the kettle. If mineral deposits occur,

Caution:

follow these steps:

The glass portion of

1. Fill the kettle halfway with water.

the kettle will become

2. Following the instructions in To Heat/Boil

extremely hot during

use and remain hot for

sometime after. Do not

3. Add one cup of white vinegar to the water in

touch the glass body

until the kettle has

cooled completely.

4. Allow the mixture to soak overnight.

To close the lid while the

5. Empty the mixture and rinse out the kettle.

kettle is hot, press down

6. Refill the kettle with water only. Bring it to a boil

on the plastic cool-touch

lid grip.

Note:

· Never fill kettle with any

liquid other than water.

· Never open the lid while

water is boiling.

· If the kettle is heated

with no water,

the internal safety

mechanism will

automatically turn

the kettle off. The

power switch will

automatically return

to the OFF position.

The kettle will begin

working again after the

kettle is removed from

and returned to the

base and the internal

temperature drops to

a safe level. The kettle

functions properly when

water is added.

Mineral Deposits

Water on page 8, bring the water to a boil.

the kettle.

and empty again. Repeat as needed.

Helpful

Hints:

Using distilled water

will help to prevent the

build-up of mineral

deposits.