Dish Network Home Network Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Odbiornik Dish Network Home Network. Dish Network Home Network 18 stron.
Drukuj stronę
On the existing router or gateway, disconnect the Ethernet cable for an existing piece of
equipment connected to an
(or
port. This equipment will be connected to the
E
LAN)
THERNET
Ethernet switch in step 2, below.
: Do not disconnect the cable connected to the router or gateway port labeled
,
Note
B
ROADBAND
I
, or
WAN
.
NTERNET
Connect the Ethernet cable disconnected in step 1 to an available
port on the Ethernet
E
THERNET
switch. Refer to the Ethernet switch's installation instructions for any additional instructions and
special considerations. If the Ethernet switch has a power adapter, connect it and plug it in
according to the switch's instructions.
Connect an Ethernet cable to the
(or
) port on the router or gateway that was made
E
LAN
THERNET
available in step 1.
Connect the other end of the Ethernet cable to an available
port on the Ethernet switch.
E
THERNET
Verify that the personal computer and any other equipment connected to the Internet connection
continues to function properly after it has been connected to the Ethernet switch. Connect the
DISH Network satellite receiver using the steps in Connecting the Satellite Receiver to an
Available Ethernet Port on page 7.
Page 6