AcoustaScape AS41 Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System stereo AcoustaScape AS41. AcoustaScape AS41 16 stron. Hi-fi landscape audio system

Lay out the speakers and subwoofer in their selected locations.

To prevent water damage, angle the speaker less than 45 degrees

up.

Dig a hole for the subwoofer, about 16" deep and 11" in diameter.

Use loose dirt to level the subwoofer. The subwoofer shouldn't be

in contact with large rocks or large empty holes.

About Speaker Wire

You will need a wire that has at least two conductors; one that can be

identified as the positive and the other as the negative. All two conductor

wires have some means of identifying which conductor is which, but at

times this identification may be subtle. It's crucial that you keep track

of which wire you use for positive (+) and negative (-). Typically if the

wires are colored red and black, the red wire is used for positive and the

black wire is used for negative. You can choose whichever color of wire

you want to be positive and negative as long as you remain consistent

throughout the install.

Your amplifier, speakers and subwoofer will use red for positive and black

for negative. It is very important to be certain that the same wire that

is attached to the positive connector in the amplifier is attached to the

positive connector at the speaker.

Dig a 5" trench where you plan on laying out the wire. Run the

wire from the amplifier to your first speaker location.

AS41HI-FI LANDSCAPE AUDIO SYSTEM MANUAL

WWW.ACOUSTASCAPE.COM

Installation