Dish Network Playmaker Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Antena Dish Network Playmaker. Dish Network Playmaker 8 stron. Portable automatic satellite tv antennas
Drukuj stronę
Setup for a Secondary Receiver
After completing the setup on the main receiver, power on the
secondary receiver. If using a new receiver, you will be guided
through the setup by the Installation Wizard; follow the on-screen
steps to complete the setup. If using a receiver that is currently
active or has been used previously, you will need to complete the
setup by doing a Check Switch test. To access the receiver menu
for running a Check Switch test, follow the steps under "Accessing
the Receiver Menu."
Accessing the Receiver Menu
If you need to access the receiver menu after initial setup, follow
the steps below to reach the receiver menu.
Press Home button twice on your remote. On the "Home" tab,
select "Settings" (figure 13).
Figure 13
Within the "Settings" menu, select "Diagnostics" (figure 14).
Figure 14
Within the "Diagnostics" menu, select "DISH" on the left side
(figure 15).
Figure 15
5
Press "Test Installation 5" to start the Check Switch test (figure 16).
Figure 16
The "Check Switch Status" screen will show the progress
(figure 17) .
Figure 17
The receiver will aquire the signal (figure 18).
Figure 18
Lastly, the receiver will download the Program Guide (figure 19).
Figure 19