Dish Network WALLY Instrukcja konfiguracji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Odbiornik TV Dish Network WALLY. Dish Network WALLY 17 stron. Single-tuner hd satellite receiver
Również dla Dish Network WALLY: Podręcznik użytkownika (16 strony), Konfiguracja (20 strony), Podręcznik użytkownika (2 strony)
Drukuj stronę
- 1. Labeling Your Cables
- 2. Disconnecting Your Cables
- 3. Connecting the Cables to Your Replacement Receiver
- 4. Powering Your Equipment
- 5. Acquiring a Satellite Signal
- 6. Downloading Your Wally Software
- 7. Pairing Your Remote Control and Setting Your Wally Location
- 8. Setting Your TV Configuration
- 9. Testing Your Hopper Connectivity to the Internet
- 10. Activating Your Wally
- 11. Returning Your Original Receiver
3. Connecting the Cables to Your Replacement Receiver (Cont'd)
c. Connect the Ethernet cable to the
"Ethernet" port on the
replacement receiver.
You may not have this cable.
d. Connect the power cord that
came with your Wally to the
"Power" port on your Wally.
e. Open the panel on the side of
the new receiver and make
sure the Smart Card is
secured firmly in the slot.
Not all receivers will have a Smart Card.
If your receiver does not have a Smart
Card, go to Step 4.