Aroma360 Mini360 2.0 Instrukcje - Strona 5

Przeglądaj online lub pobierz pdf Instrukcje dla Akcesoria Aroma360 Mini360 2.0. Aroma360 Mini360 2.0 5 stron.

13. When you are ready to program your unit, press the Working mode option and your will see 5

options; which we call either Events, Mode or Models

a. Click on the green/teal colored circle for Mode1(or the name that appears for you) to

open another window display for you to program your first set time for your diffuser.

b. When the window appears, you should see the abbreviated days of the week in one

row. If they all are highlighted in the green/teal color, that means it will scent/mist all

days of the week for the time you will program.

c. Underneath the days of the week, you would see two sets of hours and minutes. This

represents the time it will turn on the unit to mist and the time it should stop misting.

This again runs on a 24hr time frame. For example: if you wish to have it mist from 12 -

3:15pm; the first time is 12:00 while the second time would be 15:15.

d. Once you have established a time, you will then adjust the running time and pause time.

This can run from a 5 second interval to 300 seconds. We recommend as the lowest

running time as 15 seconds; this will allow enough time for the diffuser to pull the oil,

atomize it and create a mist. (We have a recommended chart if you are unsure what

time to set)

e. Last, to save your setting – you will press the check mark above the SUN (Sunday

abbreviation) to save this setting

14. You will repeat these steps if you wish to have multiple times you want your diffuser to mist.

15. If you wish to add another diffuser, you will have to add equipment, follow steps 7-14 if this

applies to you.