Dish TV S7010PVR Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Dekodery Dish TV S7010PVR. Dish TV S7010PVR 11 stron. Digital set top box

Drukuj stronę

2.Menu Operations

Once the channel scan is finished and all the channels are stored into the database,

you can start to watch the digital TV channel or listen to the radio broadcast, some

typical operations are given in this chapter.

2.1 Main Menu

Main Menu for operating a lot of functions.

(1) Press <Menu> button to enter Main Menu.

(2) Press <Info> button to display the version information of STB.

2.2 SETUP

Set the system settings of STB.

2.2.1Installation

Installation menu include General Setting, MY DISH and TP MANAGER.

2.2.1.1 General Setting

Set the receiving and playing program settings of STB, as Figure 7.

2.2.1.2 OSD Language

Set the On Screen Display Language.

2.2.1.3 Audio Language

Set the audio language for watching program.

2.2.1.4 Subtitle Language

Set the language for displaying subtitle.

2.2.1.5 Auto Time Zone / Time Zone

Allow you to enable or disable auto time zone offset update.

If you know the GMT(Greenwich Mean Time) time zone offset of your location,

set the Auto Time Zone to OFF and select an appropriate Time Zone, otherwise set it to

ON and let the system update the time zone automatically according to the transport

stream.

2.2.1.6 Auto Scan

Press <RED> button to start Auto Scan. See section 1.2.1 for details.

2.2.1.7 Manual Scan

Press <GREEN> button to start Manual Scan. See section 1.2.2 for details.

2.2.2 TV Setup

Setup the display mode for TV. See Figure 8.

SETUP- TV Setup

TV Format

16:9 PB

TV Mode

OSD Transparency

Banner Display Time

Video Output

Switch

Move

Figure 8. TV Setup

01/01/08 00:19

AUTO

3 S

CVBS

Exit

2.2.2.1 TV Format

Set display format for watching program, such as 4:3LB, 4:3PS, 16:9PB,16:9AUTO.

4:3LB(LetterBox): Typically for wide screen content displays on conventional 4:3 TV

with black bars above and below the picture.

4:3PS(PanScan): Typically for wide screen content displays on conventional 4:3 TV

with left and right edges cropped.

16:9PB(PillarBox)/16:9 AUTO: Typically for wide screen 16:9 TV.

2.2.2.2 TV Mode

Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program content.

This setting should be matched with user's TV.

2.2.2.3 OSD Transparency

Set the On Screen Display transparency. 1 is the most transparent.

2.2.2.4 Banner Display Time

Set Banner displays time. Banner doesn't disappear when set as " Always " and

disappears at timeout when set as other values.

2.2.2.5 Video Output

Set the video output mode to TV.

2.2.3 Password

Set password for menu lock or channel lock or censorship lock. And the user can

change password here, the default PIN Code is 6666.

2.2.3.1 Menu Lock

Lock the menus by password.

2.2.3.2 Channel Lock

Lock the channel which has been set to lock status when turning on the Channel Lock.

Please see section 2.3.1.2 for details.

2.2.3.3 Censorship Lock

Lock the program by password and censorship threshold. The censorship info is in

program content. Under the censorship rating, user has to enter the right password for

watching program.

2.2.3.4 Change Password

To change the PIN code, select this option, press <Left/Right> button to trigger

changing password and <0~9> buttons to enter old password, new password and

confirm new password. If succeed, the PIN Code Changed message will be displayed,

otherwise the PIN Code Error message will be displayed.

2.2.4 Advance Timer

User can set timer for watching the program by date and time manually or from the

TV/Radio Guide(see section 2.3.2). When setting date and start time is arrived,

STB will automatically switch to the wanted program. Press any key except

<Vol-/Vol+/Mute> button, STB asks user to abort it or not when watching booked

program. User can delete the event while it isn't at running.