3D Robotics pixhawk Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System autopilota 3D Robotics pixhawk. 3D Robotics pixhawk 14 stron.
Drukuj stronęCALIBRATE ACCELEROMETER
Select
Accel
Calibration, check the box for AC 3.0+, select Calibrate, and
follow the prompts to calibrate Pixhawk's accelerometer. Make sure to wait a
couple of seconds before and after changing the positions of the vehicle.
RC CALIBRATION
Select
Radio Calibration
transmitter. Turn on your transmitter, select
all sticks and switches to their extreme positions. Select
once the red bars are set for all available channels.
SELECT FLIGHT MODES
Move each switch on your transmitter to its available positions. The mission
planner will indicate the currently selected position with green highlighting. Select
a mode for each switch position, and select
5
to teach Pixhawk to work with your RC
Calibrate
Save Modes
4
6
Radio,
and move
Click when Done
to assign.
left stick
right stick