Arometrix Extraction Finder Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt laboratoryjny Arometrix Extraction Finder. Arometrix Extraction Finder 20 stron.
Również dla Arometrix Extraction Finder: Podręcznik użytkownika (14 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
2. Next, connect the hoses.
3. Then, ensure all connections are properly installed.
4. Finally, ensure the system and installation conform to all applicable laws and ordinances.
Installation of the Extraction Finder Monitor involves the following steps:
1. Install the Extraction Finder monitor outside of the C1D1-designated area. Use the supplied 10'
power cord to power your monitor.
2. Connect the sensor cable to the monitor. The monitor will take a few seconds to turn. You will see
splash screens, followed by the interface screen. It will boot up in 5 minutes or less.
3. In the Settings section on the monitor's UI, ensure the following:
a. Set Auto Integration by checking the AID (Auto) checkbox
Arometrix, Inc.
arometrix.com/resources
9