3D Systems Cubify CUBEX Duo Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Drukarki 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 10 stron. Replacing a main board pcb
Również dla 3D Systems Cubify CUBEX Duo: Instrukcja wymiany (13 strony), Instrukcja wymiany (17 strony), Podręcznik (10 strony)

Drukuj stronę
3D Systems Cubify CUBEX Duo Podręcznik

Removing the damaged Main Board PCB

Before removing the Main board PCB, label each of the looms that are plugged into
it. The PCB is marked to tell you which loom is plugged into which connector.
Remove the Looms and unplug the power supply from the main board PCB.
Gently pull up on the main board PCB to slide it off of the rubber ties holding it in
place.
6