Displax PAD Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Tablet Displax PAD. Displax PAD 18 stron. Technology for the multitouch generation

DISASSEMBLING & ASSEMBLING

DISPLAX Pad is shipped ready to use. However, you may need to do disassemble and

reassemble the product.

DISPLAX Pad uses the following screws:

M3 12mm, unbrako 2 - 37 units

II.

M8 12mm, unbrako 6 - 4 units

III.

M8 20mm, unbrako 6 -

IV.

M6 20mm, unbrako 5 -

Open Pad by unscrewing the 37 M3 screws from

Remove both

Pad size) and the 4 M8 12mm from the edges.

You now have full access to the interior of Pad and can disassemble everything.

Cautions to have:



Be careful not to damage the Skin Multitouch tail (the orange cable that has the PCB

controller attached.



Be careful when holding the LCD to avoid leaving fingerprints on the screen



When reassembling DISPLAX Pad, be careful when screwing the 37 M3 screws.

For best results start all the screws on their holes without fully tightening them. Then

once all are in place, tighten gradually alternate screws until all are firmly fixed.

Unscrew

to access the PC.

Unscrew

to access the PCB.

Remove the USB cable.

MKT.246.1 | DISPLAX

units by unscrewing the 4 screws in the center (III or IV, depending on the

PAD USER GUIDE

. Beware that

and

are loose.