Display DT-VMMv2 Instrukcja instalacji - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz Display DT-VMMv2. Display DT-VMMv2 20 stron. Projector vertical mirror mount
Drukuj stronę
FITTING THE PROJECTOR FRAME
1]
Lay the projector with its base facing up
ready to fit the projector frame. Ensure
that the projector is laid on something
that protects it from scratches or
damage.
2]
Lay the projector frame on the base
of the projector with the hooks of the
projector frame facing down towards the
back to the projector.
3]
Use the relevant fixings and washers to
fit the top bar of the mount frame to the
projector.
4]
Slacken the M6 nuts holding the bottom
bar of the mount frame and move this
until it aligns with the projectors rear set
of mounting holes. Use the 10mm socket
spanner provided for this.
5]
Use the relevant fixings and washers to
fit the bottom bar of the mount frame to
the projector.
6]
Tighten all the M6 nuts holding the
bottom bar and top bar of the mount
frame. Use the 10mm socket spanner
provided for this.
14
Fig.4. Fitting the projector frame to the projector
Fig.5. Fitting the bottom bar to the projector
Vertical Mirror Mount [DT-VMMv2]